ELPRO 805U-E User Manual download pdf (Page 28)

805U-E Wireless Ethernet User Manual

Man_805U-E Rev 1.5 Page 28

Network Settings Webpage Fields

Device Mode Used to select Bridge or Router mode.

By default this is set to Bridge.

Operating Mode Used to select Access Point or Client mode.

By default this is set to Client.

Bridge Priority The priority of the 805U-E, if configured as a bridge, in the Bridge

Spanning Tree algorithm. By default this is set to the lowest priority

at 255.

This setting will have no effect and should not be used unless the

redundant wireless links are being used. This is explained in Section

3.9

MAC Address This is the unique hardware address of the 805U-E, assigned in the

Factory. For the majority of systems, this item should not be

changed.

If the device is to be connected to equipment that will only

communicate with a set MAC Address, the 805U-E may clone that

MAC address.

Gateway IP Address This is only required if the wired LAN has a Gateway unit which

connects to devices beyond the LAN - for example, Internet

access. If there is no Gateway on the LAN, set to the same address

as the Access Point - that is, the “Ethernet IP Address” below.

Ethernet IP Address The IP address of the 805U-E on its Ethernet port. This should be

set to the IP address you require.

Ethernet IP Subnet Mask The IP network mask of the 805U-E on its Ethernet port. This

should be set to the IP address you require.

Wireless IP Address The IP address of the 805U-E on the wireless port. If the unit is

configured as a bridge this address will be the same as the Ethernet

IP address. If configured as a router, the IP address must be different

from the Ethernet IP Address - it must be consistent with the LAN

it is connecting to on the wired side.

Wireless IP Subnet Mask The network mask of the 805U-E on the radio port. If configured as

a Bridge, this must be the same as the Ethernet IP Subnet Mask.

System Address A 805U-E network comprises modules with the same "system

address”. Only modules with the same system address will

communicate with each other. The system address is a text string 1

to 31 characters in length and is normally automatically generated

by the System Generator String.

Radio Encryption Select “None”, “64-bit” or “128 AES” security encryption of the

wireless data. The default setting is “None”.

Encryption Keys 1 to 4 These are the keys used to encrypt radio data to protect data from

unwanted eavesdroppers. These keys must be set the same for all

805U-E units in the same system. If encryption is not selected, the

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 79 80

Comments to this Manuals

No comments

ELPRO 805U-E User Manual Page 28

Comments to this Manuals

Related products and manuals for Networking ELPRO 805U-E