ELPRO 805U-E User Manual download pdf (Page 26)

805U-E Wireless Ethernet User Manual

Man_805U-E Rev 1.5 Page 26

3.4 Quick Configuration

The 805U-E has default configurations which will cover most applications. These

parameters can be manually changed however this is not necessary for the majority of

applications.

A “Quick Start” configuration is provided for simple networks. This is the first stage of the

module configuration. For most applications, no further configuration is required. For more

advanced applications, the other parameters can be changed via the other configuration

pages after the Quick Start page.

Enter the Configuration web-page as per section 3.3 and select “Quick Start”.

You need to select:

• Access Point or Client. Bridge operation is assumed - for Router selection, go to the

Network page after Quick Start

• IP Address and Subnet Mask for your application. The default settings will be shown. If

your system is connecting individual devices which are not connected to an existing

Ethernet LAN, then you can use the factory default IP values. If you are connecting to

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 79 80

No comments

ELPRO 805U-E User Manual Page 26