ELPRO 805U-E User Manual download pdf (Page 64)

9.6.5 Remote Setup of multiple Nivel220 with Radio (ELPRO 805U-E)

748 488

748 498

722 409

748 488

722 409

567 199

802 906 or

802 907

802 906 or

802 907

567 199

575 869

567 199

Ethernet cable

ELPRO

ELPRO antenna

ELPRO

ELPRO antenna

Select Sensor

576 199 NIVEL220, inclination sensor with R4852 interface

Select Cables

748 488 0.8m power supply cable, connects power supply unit 722 409 to RS232/RS485 converter, Lemo-0 to

2 wires to terminal strip.

748 498 1.8m communication cable, connects Nivel220 to RS232/RS485 converter, Lemo-0 to 4 wires to

terminal strip.

802 906 5.0m connection cable RS485. Connects two Nivel220 sensor ports 1 or 2, Lemo-0 to Lemo-0.

802 907 20.0m connection cable RS485. Connects two Nivel220 sensor ports 1 or 2, Lemo-0 to Lemo-0.

575 869 Terminator 120 Ohm, for RS485 Bus

Ethernet

cable

Refer to “9.7.1 Cables”.

Select Radio Modem

ELPRO Interconnect serial or Ethernet devices by industrial wireless radio modems. Refer to “9.6 Wireless

Ethernet Radio”.

Select Power

722 409 Power supply unit for GPS receiver, for indoor use only, input 100V-240VAC 50-60HZ, output 12VCD,

cable with 5-pin Lemo to connect to GPS.

Select power cords for 12V power supply unit 722 409. Refer to “5 Power supply

”.

Select Software

GeoMoS Monitor / Analyzer Refer to “1 GeoMoS Modules”

GNSS QC Refer to “4.2.5 GNSS QC

”

Important

 Use the NivelTool software from the CD to set the correct Nivel ID and baud rate.

1 2 ... 59 60 61 62 63 64 65 66

Comments to this Manuals

No comments

ELPRO 805U-E User Manual Page 64

Comments to this Manuals

Related products and manuals for Networking ELPRO 805U-E